| | Candle Making Mould Accessories | | |
| | Candle Making Mould Accessories | | |
| Automatic discounts when the total of your order reaches £100. | Prices below are inclusive of VAT @ 17.5% or Non EC surcharge if applicable. |
| Adjustable Mould holder | Includes 4 retaining rings. Ideal for layered candles. The retaining ring allows the candles to be rotated and held at an angle. This mould holder has been specially made for use with our polycarbonate moulds and can hold a total of 6 moulds (depending on size) Do not over tighten retaining rings | £15.60 |  |  | |
| Spare retaining ring for adjustable mould holder above | £3.50 | |  | ||
| Gasket | Spare Silicone Gasket for moulds M30, M31, M33, M45, M47, M48, M50 | 1 metre | £1.00 | |  |
| Tea-light foil cups | Foil cups ø 38.6 mm - will take t light candles made in our M16 mould. Special size t-light wicks are available on our wick page | 20 | £1.58 | | |
| 100 | £6.12 | | |||
| 500 | £26.38 | | |||
Silicone Spray | Very Lightly spray mould before pouring to help release. May help protect moulds after cleaning. 400 ml | £5.60 | | | |
| Talcum Powder | Specially designed for use with rubber moulds. To help the moulds not stick together and prevents moulds from becoming brittle, which extends their working and storage life. 60g | £2.15 | | | |
| Votive Wick Pin | Place in votive mould, pour wax as normal. When set remove votive from the mould, take out pin and insert wick assembly.
Reusable, long lasting and very easy! Our V1 glass can also be used as a votive mould - also handy to use with our t light mould Order 6 or more for 10% discount | £2.20 | | | |
Mould Sealer | Reusable putty to seal bottom of mould when pouring wax – make sure wick has been pre-waxed. Size 14 x 6.5 cm Save 10% when you order 12+ | £0.99 | | | |
Make your own Latex moulds | Latex Gel - single compound, no mixing required. Latex Gel is a water soluble, viscous and high elastic mould-making compound. Dip you item in the gel as many times as required to produce a mould to the thickness needed. Latex Gel is thicker than Latex Milk so dries quicker for production of seamless tubular rubber moulds or to reinforce moulds made of a Latex Emulsion. Moulds can then be cast with moulding compounds, resin or wax. | 250 ml | £7.70 | |  |
| 750 ml | £21.35 | | |||
| Latex Milk - single compound, no mixing required. Latex Milk when liquid is white and become transparent when it hardens. Useful for the production of seamless tubular rubber moulds. You can either dip your item directly into the Latex Milk or apply it with a brush in several coats. Latex milk has a shrinkage rate of up to 10 %. | 250 ml | £5.60 | |  | |
| 750 ml | £14.50 | | |||
Click on the links below for other types of Candle Moulds and Accessories
More Candle Making Supplies pages
| Accessories | Books | Colours / Dyes | Containers | Decorating | Embeds | Fragrances | Kits | Moulds | Wax and additives | Wicks |
Don't forget to look at the rest of our site
All information, text, pictures and designs on this site are copyrighted to FullMoons Cauldron.
Nothing from this site is to be downloaded or copied without the express written permission of an authorised FullMoons Cauldron representative.
All sizes and quantities are approximate.
